Announcement

Collapse
No announcement yet.

Help 2015 z3

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Help 2015 z3

    My boat just went dead seems like has no power to starter but voltage is good. All Gage's are working touch screen is powered up but when you turn key nothing happens anyone else having this problem

    #2
    I know this sounds silly, but make sure your throttle is in neutral.
    Good luck.

    Comment


      #3
      Yea I have checked all that and tether is good to. This just sucks because just started my vacation now boat is dead not rill happy right now

      Comment


        #4
        There is a breaker near the batteries. It's mounted on the underside of the top top corner. Maybe that could be it?

        Comment


          #5
          Breaker is good

          Comment


            #6
            Wire on back of key cylinder came off?


            Sent from my iPhone using Tapatalk

            Comment


              #7
              Does it turn over or click when trying to start? Depending on the build date Indmar had an update for the ground strap rerouting it directly to the starter.
              Xtreme Powersports & Marine
              www.xps-usa.com

              Comment


                #8
                Kill switch under the throttle?

                Comment


                  #9
                  It just clicks once and then nothing battery's good all have 12.5 volts when trying to Crank starter it has 12 volts. What happend was we were cruseing down the lake about 25 engine revved like prop fall of so I instantly pulled back on throttle and shut key off and now nothing

                  Comment


                    #10
                    Originally posted by tonka8ty View Post
                    It just clicks once and then nothing battery's good all have 12.5 volts when trying to Crank starter it has 12 volts. What happend was we were cruseing down the lake about 25 engine revved like prop fall of so I instantly pulled back on throttle and shut key off and now nothing
                    did you happen to notice if your rpms went way high, or was it just the sound? did you loose speed? or did you auto just pull back the throttle when it went on?
                    2011 Tigé RZ4
                    www.re-viveupholstery.com

                    Comment


                      #11
                      You might want to contact your dealer, as this is a 15 model and you will want them to be informed on anything that may need taken care of whether it be warranty or not.

                      Comment


                        #12
                        Rpm went high lost speed. It is going to dealer in morning

                        Comment


                          #13
                          My new Z1 wouldn't start after 30 minutes of bouncing across the lake. Starter would engage but not long enough to turn the engine over. Had to be towed in. Then after a 3 hour trailer ride home it started. As mentioned above, Indmar had a service bulletin out to move the ground. Dealer did the work and that seems to have fixed it.

                          Comment


                            #14
                            Originally posted by ryfrutiger View Post
                            Kill switch under the throttle?
                            This was my thought as well.

                            Comment


                              #15
                              The dealer will be able to get you fixed up. Kill switch and throttle placement make sense, but why would it rev to high rpms? Might be something with the electrical shift. Something happened to make it rev like it was in neutral then when you dropped it to neutral, the switch isn't reading. The signal might think it's still in gear and wont let the boat start.

                              Let us know what you find out.

                              Comment

                              Working...
                              X