98 pre2200i replacement rear vent covers ????

[Joker58]

lost the rear right fiberglass vent cover on the transom that seems to have been epoxied on ?
any ideas where to find one?

[Ruger761]

Welcome to the site!

That's going to be a tough one to find. More than likely you will have to make something to take its place or try to find a boat salvage that has one.

[skinut11]

I got brand new ones from the factory for my 2000 22i just last month. I had to go through a dealer to get them so they ended up being kind of pricey. ($130.00 apiece)
I hear they make them to order so they take awhile to ship also. I would suggest getting both sides as the ones i got for my boat were a slightly different shape and different shade of white, but they fit fine and look good.

[Ruger761]

Ah good to know, I figured there was no way they would have them still or make them.

[Bryan]

I also ran into this problem... Skinut11 is correct.. Call your dealer and they will order from factory.. No stock, but made to order. My dealer told me $150/each...

[Joker58]

Thanks guys I figured after looking at the way it was epoxied on coupled with the fact that I have no clue how it even came off in the first place I wasn't the only one that had this happen and that someone here would point me in the right direction.

[Joker58]

I also ran into this problem... Skinut11 is correct.. Call your dealer and they will order from factory.. No stock, but made to order. My dealer told me $150/each...

my dealer just quoted me $150 as well also mentioned the the white gelcoat would be the same color white as the current models ...

Break
Out
Another
Thousand

[Bryan]

Ya... matching the color is gonna be rough because they're gonna use whatever white they have in stock, and the current white is actually white, while the white on the older boats was more off white or cream... I ended up slapping a big ronix sticker across one of mine and a hyperlite h on the other side... Helped make it not as noticable

[Joker58]

Ya... matching the color is gonna be rough because they're gonna use whatever white they have in stock, and the current white is actually white, while the white on the older boats was more off white or cream... I ended up slapping a big ronix sticker across one of mine and a hyperlite h on the other side... Helped make it not as noticable

not a bad idea

[Joker58]

what have you guys been using to re-attach them?
Marinetex or PC-11 or some other equivalent?

[TeamAllen]

I just had the dealer do it for me.

[Bryan]

My buddy owns a local auto body shop so I had him do it for me.. I still had some of the old epoxy residue left and I wasn't too sure what to use to get it off, so he cleaned everything off and re-stuck them for me. Not sure what he used..