Picture of an '07

[NICKYPOO]

"e" for electronics? Sad thing is, you know it aint in there. If it is in there however, it would be the hottest thing since sunburn and I will have sounded like a total dickhole. Again.

[NICKYPOO]

I've got a question. Is that a start button right next to the key on the dash?

[shane]

I would guess that is the horn button.

[rushin]

Is that a start button right next to the key on the dash?

I would say horn also, because of the key.

[rushin]

I don't see why these two holes cannot be connected together without sacrificing integrity. From the outside of the aft one to the outside of the front one and taller. Wouldn't it be easier for the builders also?

[NICKYPOO]

Originally posted by rushin
I would say horn also, because of the key.

Horn buttons are usually on a rocker switch. Not that it's impossible to use a button for a horn, just seems unlikely.

You gonna be out on Sun. rushin?

[NICKYPOO]

Originally posted by rushin
I don't see why these two holes cannot be connected together without sacrificing integrity. From the outside of the aft one to the outside of the front one and taller. Wouldn't it be easier for the builders also?

That would be ideal.

[rushin]

You gonna be out on Sun. rushin?

Tomorrow. You?

Horn buttons are usually on a rocker switch. Not that it's impossible to use a button for a horn, just seems unlikely.

Mine is a pretty red button.

[NICKYPOO]

Originally posted by rushin
Tomorrow. You?



Mine is a pretty red button.

Sunday. Maybe next week.

Hmm, well, there you go. Mine is the always sleek and stylish rocker switch.

[dogbert]

Originally posted by rushin
Mine is a pretty red button.

Mine, too.

[wrangler]

Congrats to Tige on hitting a home run on the new boat. Rumor has it that Chris at Tige Watersports in Corona had lots to do with the design of this boat and that the first glimpse of this boat will be at the Tige reunion in August in Parker AZ... Great job Chris and all the Tige folks...

I haven't been a big picklefork fan and haven't liked the transom of the MC at all...looks like a box bolted on for the motor... The Tige looks great... Perhaps the 24 foot version will be in our future....Hmmm...

[Coach]

Originally posted by wrangler
Congrats to Tige on hitting a home run on the new boat. Rumor has it that Chris at Tige Watersports in Corona had lots to do with the design of this boat and that the first glimpse of this boat will be at the Tige reunion in August in Parker AZ... Great job Chris and all the Tige folks...

I haven't been a big picklefork fan and haven't liked the transom of the MC at all...looks like a box bolted on for the motor... The Tige looks great... Perhaps the 24 foot version will be in our future....Hmmm...

Yes he did. I talked with Chris and Daniel for about an hour about the RZ2 yesterday. A 24 foot version is in the works but not for a while.

Nice thing to note- Chris told me they loaded the front end with 900 lbs and tried to bring water over the front and couldn't! He also explained that the pictures don't show it but the side photo where the grey is actually comes out from the boat in a "cheveron" shape which creates more hard angles and even nicer styling. He also told me alot about the Engine and the new monitoring system only offered with the Tige through Marine Power. Too much to detail here but it sounded very cool. The cruise control has some very cool tweeks that make it even easier for other to pull you. They should have one in about 2 weeks to get ready for the reunion. I can't wait to see it up close. They also are stepping it up in the interior department. Better foam, better vinyl, hinged seats in the main cabin, and the transom center doors are fiberglass not lexon this year. I can't wait to see one!!!

[wrangler]

Sounds like it's all good... I will be anxious to see one in person as well... Great job Chris!!!

[Cheeky]

Has there been anymore hard info on the price. I was told it would be close to the 24VE price for the RZ2. My math was it was roughly $5000 or more above a similar 22ve.

[rushin]

Chris told me they loaded the front end with 900 lbs and tried to bring water over the front and couldn't!

Ah, I find this very hard to believe.