Has any one used one of the proko flush pro kits. I am looking at installing one in my boat this year. My plunger flush kit for under the boat is getting old and i am getting sick of crawling under the boat. So whats your experience with them. Thanks Chad.
-
-
I just put one on my 22v and love it.
Tony -
I've got mine coming in the mail. Anyone have any tips for the install?Comment
-
Guys I have seen those things fail, just pipe in a tee and a valve and a hose Bib, you will be more than happy
Comment
-
this is what I have on mine too, BC rider wants some pics of mine since we have the same boat so I will post some up later. But same idea as above and then you have a strainer as well, and I can't believe all the crap it catches.Comment
-
I've had a strainer on all my boats except when I had a outboardComment
-
looking at these strainers online. What size should I be installing? 1", 1 1/4"?Comment
-
1-1/4
Comment
-
Perfect. Thanks.Comment
-
I'll get u pics tomorrow hopefullyComment
-
I like this set up, looks like this is the way to go. Thanks for posting your setup!Originally posted by Z1Fan View PostGuys I have seen those things fail, just pipe in a tee and a valve and a hose Bib, you will be more than happyComment
-
Just don't use Teflon tape, make sure you use just regular plumbing paste, i.e. DopeComment
-
similar to z1
My setup is similar to z1, mine will pertain a little to more to the 22ve guys if they wanna have a look, I couldn't believe the amount of stuff it picks up.
The plumbing comes out the bottom of hull through the factory pickup and ball valve up to the tee and hose bib across the back of the back seat to the strainer, then back down to cooling inlet.
hope this helps too.
filter1.jpgFilter2.jpgFilter3.jpgComment
Comment