Whent out today ballist filled fine but no stero checked fuses they seem fine then no taps I go to drain ballist and no drain or fill I tried useing the manual switch with no luck any help would be much appreciated!
Announcement
Collapse
No announcement yet.
Pleas help z3 no balast ,stero ,taps or 12 volt plugs ?
Collapse
X
-
Gotta ask the obvious, but by what means are you determining "power"? Is this a voltage reading from a digital volt meter? if so, then replacing a blown amp fuse at the battery would restore battery voltage to the amp, thus to the yellow head-unit B+ wire thats typically piggybacked into one of the amp's B+ lugs. Take that volt meter and test there.Mikes Liquid Audio: Knowledge Experience Customer Service you can trust-KICKER WetSounds ACME props FlyHigh Custom Ballast Clarion LiquidLumens LEDs Roswell Wave Deflector And More
Comment
-
Found the problem wet sounds amp has a problem it blew the 60a buss fuse and when I was able to get power back to the amp it was making burning electric smell but was working tested amp and it seemed to have bad continuity going to send it in I was able to rig up tower speakers temporarily . Thanks for the help!!!
Comment
Comment