Reset button on PCM? 2013 Z1

[dmbisbest]

I have another thread started on my issues but I thought I would bring this question to the masses.... Is there a reset button on engine block? If so where? Any diagrams out there?

[Stingreye]

Planet Nautique has the PCM manuals posted:
http://www.planetnautique.com/vb3/co...Owners-Manuals

They are actually pretty good compared to other engine mfg IMHO.

[Stingreye]

http://www.planetnautique.com/Correc...13/2013pcm.pdf

Look at page 32 (printed page not PDf page) called Electrical system and Fuse Block.

The part I would expect to call out a main breaker, they call out a 40 Amp main panel fuse.

So if you are hunting for a button (like I would have expected), it appears that it uses that fuse.

Hopefully, someone that knows a definitive answer will chime in and say if they did remove that reset button and make it a fuse.

Good luck with everything!

[dmbisbest]

Thanks for posting.

Does anyone know where this is? helm’s instrument wiring harness. we have checked all the other things.

The boat’s ignition fuse may be located on the instrument panel, the fuse holder block or as part of the helm’s instrument wiring harness. Check the wiring diagrams supplied from the boat manufacturer for the exact location.

[dom w. forte]

There is a relay fuse block on the engine, aprox, 2 inch by 4 inch and is clearly labeled about fuses and relays , it ussually is above the intake manifold either front or rear, normally the fuse that blows is the 20 amp for the cranking , is it blew theres probably a starter issue.

[dmbisbest]

Thanks dom. I pulled those fuses and they all look good. Strange fuses.... But I assume that the they would be pretty burnt up if blown. Right?

[chpthril]

Are you actually checking for voltage across all these fuse or just looking at them?

[dmbisbest]

Just looking at them. Is that wrong?