Wakeboard Wake

[gibbs114]

I am having trouble dialing in my wakeboard wake on the z1. The surf wave is great and that's why we got it but I still wakeboard now and again. Can't seam to clean it up.

Pro ballast
1000lbs sacs rear 50% when wakeboarding
Front full
Taps 5
20.4 mph


Sent from my iPhone using Tapatalk

[talltigeguy]

You need to go faster. If you don't feel comfortable going faster, then you don't need that much ballast either.

[gibbs114]

That is the speed I'm riding now because that's what I rode with my A22. That is what I thought would happen with the Tige. The a22 had a clean wake sacked out at slower speeds. But I didn't really buy this one to wakeboard. I'll try some different speeds and weight. Thanks


Sent from my iPhone using Tapatalk

[chpthril]

I would try less rear ballast and more bow. Also, dont forget the TAPS.

[robert theisen]

Try just under floor hard tanks in the rear and front bags full. Taps at 3-4 and go 21 mph.That should be good for at least a 75 ft line to as short as 65 ft.

[turbonine]

Either lose the weight or increase the speed up to 23.

[Ewok]

Less rear ballast or more bow ballast and faster speed, as well as less taps. Try setting taps at zero and see if that cleans it up, then slowly increase the taps until the wake is the shape you want, but if you go too high it'll wash out.

[jmhatchett]

When im sacked out and heavy i run 24 mph or 24.4 area. Not as much weight for other riders i will drop down to 23 mph but with any ballast i look to stay around that number.