Need Wakeboard Rack Bolt

[mschmidt33]

Just installed the stock 2013 RZR folding racks and over tightened the long M6 fastener and broke the nut off. Anyone got one or know an easy way to get one through Tige? I was being so careful not to scratch anything but didn't know my own strength.

[tobike]

i had to replace mine and ordered them from Bolt Depot online. I couldn't find the socket cap bolts any longer than 3 inches at local retailers. Also, if you overtighten, you will bend the end of the bolt before you break it, making it difficult to remove. The curve of the rack does not allow the nut to sit flush and bolt will bend if you get too tight.

[mschmidt33]

Can you help by looking up the part number you ordered?

i had to replace mine and ordered them from Bolt Depot online. I couldn't find the socket cap bolts any longer than 3 inches at local retailers. Also, if you overtighten, you will bend the end of the bolt before you break it, making it difficult to remove. The curve of the rack does not allow the nut to sit flush and bolt will bend if you get too tight.

[mschmidt33]

Nevermind, I found one locally that worked.

[whiteflash watersports]

Just and FYI - we have bought those at ace hardware