My project for the past 6 weeks

[Tige22i]

Great work man! Do you live off of College/95? We are around the corner near Mission/Greenway and have seen a very similar boat.

Nope, I live in SW Vegas. Boat is normally stored inside a unit closer to the lake, except for the 6 weeks it was in my driveway. Barely finished before the HOA fined me for having it parked there

[Tige22i]

Good looking boat! Have you ever attended a local Tige Owner's Reunion?

Have not, it's on our list but we have always been out if town or something. Hope to one of these years.

[chpthril]

Have not, it's on our list but we have always been out if town or something. Hope to one of these years.

Some of us are going to get together in Jan for a Mead surf run, wanna join?

[Tige22i]

Nice work!

DIY carbon fiber is very sweet.

How do you like that surfboard, I am for sure looking for something new, and have wondered if that might be a good one?

The board really is fantastic, nothing but good things to say. I am 190# and it keeps me up without the rope no problems. I even had my 30# 5yo daughter on the board with me without the rope and it kept us both up without issue.

[Tige22i]

Some of us are going to get together in Jan for a Mead surf run, wanna join?

Absolutely, the year before last we were out on New Year's Day and it was just beautiful. I have yet to need a wetsuit out there. Always have them in the boat, just never have needed it. I learned to ski as a kid on some very cold Idaho mountain lakes where the water is in the 50s in July. The water is 68deg right now at Mead which is great.

[chpthril]

Absolutely, the year before last we were out on New Year's Day and it was just beautiful. I have yet to need a wetsuit out there. Always have then, just never have needed it. I learned to ski as a kid on some very cold Idaho mountain lakes where the water is in the 50s in July. The water is 68deg right now at mead which is great.

so far its me, dingle, bad05 and dan aka dan&christy. right now, we are looking at Sat the 11th

[EricU]

Some of us are going to get together in Jan for a Mead surf run, wanna join?

Wow! Are you towing a boat from NC? Makes my 3 hour trips to Oroville look like nothing!!!

[Allan Kendall]

Thats awesome....

[chpthril]

Wow! Are you towing a boat from NC? Makes my 3 hour trips to Oroville look like nothing!!!

coming out to Vegas for a week for the International CES

[cpropes2005]

How hard was it to remove and re-install the main dash panel? I did the exact same thing as you with the carbon fiber wrap material on my lower three panels but I have been procrastinating on the main one because it looks like removing all of the gauges and making sure the wires stay organized/get hooked back up into the correct terminals might be a pia.

[Bad05]

so far its me, dingle, bad05 and dan aka dan&christy. right now, we are looking at Sat the 11th

And I WILL be wearing my wetsuit, chpthril is still looking for his "boys" after his surf run last year. Air was 50 water was 51 if I remember right and dingles "dry"suit almost sunk him, ha! Good times and looking forward to this year!

[Tige22i]

How hard was it to remove and re-install the main dash panel? I did the exact same thing as you with the carbon fiber wrap material on my lower three panels but I have been procrastinating on the main one because it looks like removing all of the gauges and making sure the wires stay organized/get hooked back up into the correct terminals might be a pia.

Yeah it wasn't fun and although it looks pretty decent there are still some areas I don't like. I first did it with the gauges on and just loosened everything and cut holes in the vinyl to make it work etc. Then I didn't like that result which actually didn't look too terrible for not taking apart the dash. Later I decided to just do it right and pulled it all off. I wish the material was a bit sticker though because it did bubble up around the gauges a bit in some spots.
I did take pics of all the wiring before unplugging, my temp gauge is now not working though so I need to get that figured out.
Overall I am happy with the result though.

[JohnnieMo]

I love the work you've done. Also the un-abashed selfie

It's great to see a ten year old Tige looking as good as yours. It reminds me that I made a good long term investment.

The deckadence really does bring it all together. Props for a good Canadian company

[EricU]

Great looking boat. Love the color combo.

1. Did you take the glass out and powdercoat the windshield frame before (the first pic) or was it always black?
2. Can the Deckadence do custom embroidery?
3. How's the tint out on the water?

Again, Nice, very Nice!

[RZR]

That looks great. Thanks for posting the pics.