Walker board broken!

[RID22]

Is my Bomb Pop board toast, or can this be repaired? Its worse than the pictures show. For some reason the Walker website is gone, so I'm not sure who can fix this. Any suggestions?
ImageUploadedByTapatalk1374589792.213795.jpg
ImageUploadedByTapatalk1374589809.818533.jpg
ImageUploadedByTapatalk1374589828.902247.jpg

[Magnumguru]

It looks to me like if you buy some polystyrene foam at the local lumberyard, make a wedge that will fit in the void, but a bit smaller so there is room to fill over the top, and adhere it with 3M 78 Adhesive (polystyrene adhesive) you will be able to fill the foam back it, and then just order a surf board repair kit-
http://www.usoutdoor.com/surf-source...FY87MgodaFAAeA

and it will walk you through the rest.

That would be the best bet, unless you have a fiberglass or surf shop in town that will do it for you.

[Joeprunc]

Pictures are hard to tell, as far as extents of the damage, but I'd say definitely reparable.

Get a ding repair kit, watch some of the youtube videos and do it yourself.

Resin is messy so be sure to wear gloves and do it over a disposable surface. Take your time and make sure you prep it properly.

[RID22]

Thanks for the suggestions. I actually got a response on WW by another board shaping manufacturer, that offered to help. I thought that was super cool of the shaper at shred stixx, to help out with another competitors board. I ended out speaking with Walker and they actually said Nick at Shred Stixx does phenomenal work and he could get to it quickly. The board is getting shipped out tomorrow.

Sweet!