If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Hi all. Can someone point me in the right direction regarding Bimini install instructions and stow instructions for a 2013 rz2 alpha z tower I think. Thanks in advance.
Grant
This comes up once in a while. When I pull my boat out this weekend I'll do a how to series of pics and a video for everyone with the Bimini on the alphaZ.
2009 RZ2, PCM 343, MLA Surf Ballast, Premium Sound.
2013 Toyota Sequoia 4WD W/Timbren SES
I would also be interested in this. Opening up the bimini top isn't bad but rolling it back into the storage position an making sure the metals bars are in place that is what I am worried about.
This is a pain but with practice you get a system down.
I suggest buying a pair of those rubber wrapped wires for cinching hoses and the like (about 2 ft long and a 1/4" wide). I use the rubber wrapped wires to secure the loose ends of the arced bimini support rod to the attached adjustable arm. After the support rod is secured, it is MUCH easier to wrap the loose bimini fabric around the the poles. I then use a few short bungy cords to secure the wrapped bimini fabric making it MUCH easier to zip the cover on.
The above technique makes it easy and fast to take down the bimini by yourself.
I would also be interested in this. Opening up the bimini top isn't bad but rolling it back into the storage position an making sure the metals bars are in place that is what I am worried about.
This comes up once in a while. When I pull my boat out this weekend I'll do a how to series of pics and a video for everyone with the Bimini on the alphaZ.
That would be great, I can sticky it and put it in the How To section. If you need some help just let me know.
Thanks Matt, I was planning on posting a YouTube video but if you know a better way to post video for this site let me know. I have a pretty good system worked out for installing, folding and traveling with the bimini top. It took me 2 hours to figure it out the first time, but I can set it up and fold it up in about 5 min now.
2009 RZ2, PCM 343, MLA Surf Ballast, Premium Sound.
2013 Toyota Sequoia 4WD W/Timbren SES
Thanks Matt, I was planning on posting a YouTube video but if you know a better way to post video for this site let me know. I have a pretty good system worked out for installing, folding and traveling with the bimini top. It took me 2 hours to figure it out the first time, but I can set it up and fold it up in about 5 min now.
Youtube is perfect. Just embed the video and I will make it a sticky and put in the how to section.
WOW ask and you shall receive. That just saved me an insane amount of time. Thank you for going to the effort of posting that video I am sure many will benefit I sure did,
Grant
Comment