Convex VX -- Goofy side wave

[chpthril]

Can you tell me what sacs you got for the RZR? Are they I integrated with the factory system so you can fill and drain from the tige touch?

Hello, The sacs that i switched to i believe are for an rz2. They were a direct hook up from the factory sacs and i also added extra fill pumps and also a side to side pump. Everything except the side to side pump is wired to the tige touch and with the extra fill pumps it takes the same amount of time to ballast the bigger sacs, never even had to adjust the timers. I picked up everything from chpthrll and I would recommend talking to him if you are interested. If you go to the bigger sacs in the back you will also want to swap your drain and vent lines side to side to prevent unwanted draining after you start surfing. For the extra 400lbs. in the front we just throw a sac on the seat. I will get some pics of the wave later on in the week when i get home from work.

WCHIII,

Im just down the road from you in Charlotte and can get you fixed up. Dont hesitate to give me a shout.

seven oh four, 6 one 6, for 7 for nine
info(AT)mikesliquidaudio(DOT)com

[ScottG]

20130628_191314.jpg20130628_202410.jpg20130628_202906.jpg20130628_204141-1.jpg20130628_202413.jpg


Here are a few pics of the wake from our rzr. I will try and get a few better ones this weekend too. This is without the convex vx in fairly shallow water,it cleans up a bit more if we go to the deeper part of the lake. speed is about 10.2- 10.4, taps @2

[ScottG]

sorry about the sideways pics, they were the right way on the computer. Not sure what happened.