Announcement

Collapse
No announcement yet.

The spring updates had began

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    That's understandable. That Aerial isn't going to fit like you have it shown. The rear mounts would have to go to the sides of the hull. They are also China made and if you have to send anything back, it'll be two weeks before you get a replacement. They will not ship anything until they get the offending part back. Had to do that on a friend's boat. The upper tube was bent (super thin tubing) when we took it out of the box and the tower would not go together. It sat there half done for two weeks.
    You'll get your chance, smart guy.

    Comment


      #17
      I knew the fit on the screen shots, but gives me an idea of what it looks like. Scale is off a bit too. Mount points are longer on the aerial than it shows.

      China makes me want to order the H2O plus if I had a problem its an easy call or at most if I needed it quickly a 4 hr total drive to get new parts.

      Comment


        #18
        Just makin sure you know that. That's another reason I like the MT2. You can mount it to the gunwhale. It actually looks pretty good on your boat/our boats.
        You'll get your chance, smart guy.

        Comment


          #19
          What did you use for your teak swim-step? I'm going to take my boat out in a couple of weeks and this would be a good project to work on before summer.

          Comment


            #20
            I'll have to look a little more before ordering.


            I just took the deck off (it was powerwashed before winter)sanded it down with some 80 and 100 grit. Dont want it too smooth or it will be slick. Then blew all dust off, gave it 2 coats of Starbrite Teak Oil.

            Comment


              #21
              We were an Arial dealer. No more. Their customer service is the absolute worst. So bad that my parts accessory supplier stopped carrying them in their catalogs.

              Comment


                #22
                Originally posted by dreamintige' View Post
                We were an Arial dealer. No more. Their customer service is the absolute worst. So bad that my parts accessory supplier stopped carrying them in their catalogs.
                Really. Well that makes my decision pretty easy then on ordering anything from them.

                Comment


                  #23
                  Nice teak job. That looks amazing.
                  Wake Up or Stay On Shore!

                  Comment


                    #24
                    Thanks!

                    Comment


                      #25
                      Well I ordered the H2O tower today. Should have it in about 1-2 weeks. Has to be sent out to be powder coated white. A nice surprise they've updated it some and it will now have an intergrated Nav light. Ready to get it installed and some warmer weather.

                      Comment


                        #26
                        That'll look nice in white. Real nice. The more I look at that tower, the more I like it. Let us know how it performs.
                        You'll get your chance, smart guy.

                        Comment


                          #27
                          Originally posted by Ruger761 View Post
                          Ive never been crazy on the look of the front 2 bars on the monsters. They just turn in too quickly killing view out of front.

                          The only thing Ive heard on Aerial is they sometimes are not the strongest. Have you had any dealings with them?
                          I had an aerial on my last boat. It was great the only thing I did to it was has the joints where the tower tubes meet the inserts welded up by a local shop made the tower super tight.
                          Attached Files

                          Comment


                            #28
                            Great job on the deck.. Looks like new

                            Comment


                              #29
                              Originally posted by LTtige22v View Post
                              I had an aerial on my last boat. It was great the only thing I did to it was has the joints where the tower tubes meet the inserts welded up by a local shop made the tower super tight.
                              That doesnt shock me after reading the install instructions.

                              I think the H2O is going to be a great tower. I'll add comments/pics after the install. Then we'll also see how well they preform. The fun part is when you put a tape measure to the boat and see how nothing is ever perfect side to side. The end of the window frame is off about 1" side to side from the bow. So its almost throw the tape out the window make the tower match up with the boat side to side.

                              Comment


                                #30
                                Originally posted by Ruger761 View Post
                                That doesnt shock me after reading the install instructions.

                                I think the H2O is going to be a great tower. I'll add comments/pics after the install. Then we'll also see how well they preform. The fun part is when you put a tape measure to the boat and see how nothing is ever perfect side to side. The end of the window frame is off about 1" side to side from the bow. So its almost throw the tape out the window make the tower match up with the boat side to side.
                                That's exactly what I did. I took the boat down to the tower manufacturer and had them build the tower to the boat.
                                You'll get your chance, smart guy.

                                Comment

                                Working...
                                X