Announcement

Collapse
No announcement yet.

LED Rings Group Buy

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    Fellas,

    I do not want this thread to go off in a negative direction. First let me say, that am not an authorized online retailer due to my choice. I do not have the time to run an online click-n-buy type e-store. I also do not want to tie up the capital to stock the necessary inventory quantities. Again, this is my choice and is not on my horizon right now.

    Wet Sounds asks this of their dealers in order to uphold the integrity and quality of the product. It prevent costly price wars among dealers, in which the customer only wins, but for a short time. It allows me as the local dealer, to sell to my local customers in which I can actually make a profit. I truly appreciate the loyalty, but ask please that no one protest Wet Sounds. Imagine what our Tige's would be worth if a dealer was selling at deep discounts all across the US, undercutting your local dealer. Many many top-shelf quality products have similar provisions in there dealer agreements.

    I recommended Earmark because David contributes a lot of time and effort to the marine audio online community. Although he and I are, to some degree, competitors, I consider him a friend, and one who I respect.

    Thanks,
    Last edited by chpthril; 12-19-2012, 10:35 PM.
    Mikes Liquid Audio: Knowledge Experience Customer Service you can trust-KICKER WetSounds ACME props FlyHigh Custom Ballast Clarion LiquidLumens LEDs Roswell Wave Deflector And More

    Comment


      #17
      I agree with you on some parts mike.. but most these business dont have the customer satisfaction you give. Hence why people would like choice in the product they buy and whom they are buying it from =) But Ill leave it at that cause I dont wanna clutter up this group buy =) Dont forget me on that pricing for all my cup holders atleast
      Last edited by Wickedcummins; 12-20-2012, 02:42 AM.
      www.1320diesel.com Home of the Fastest Diesels!
      http://youtu.be/dEDdM0Y3IGs?hd=1

      Comment


        #18
        Hey mike. I think I would want a pair of RGB for for the in boat Kicker speakers. And probably a pair for the cup holders. I will have to look at my boat to see if I would want more to start with. Also what is the RGB controler going to cost?
        Wake Up or Stay On Shore!

        Comment


          #19
          Update

          Ok crew, heres where we're at. I am heading out today for Consumer Electronics show in Vegas and will be back next week. I will be putting in my ring order and those that have confirmed their details. So far, we have:

          GCombe = 3 pr in-boats orange. we just need to decide which model so we can make sure we get the correct diemnsions.
          Wicked = 12 cup-holder rings in green. Just need to double check the dia of your cup-holder do to too many variances among manufactures.
          Dave K = 3 pair of in-boats in red and maybe some cup-holders. Just need to decide on how many and double check the OD of them.

          And the maybe's

          Bryce = Are you in for some cup-holder?
          Ddubz = just in-boat rings, no LEDs, so I just need to know how many pair and for what model speaker and if you also want cup-holder rings, I need to know how many and the OD of your cup-holders
          Talltigeguy = How many cup-holder and what color?

          Anyone else, jump in!
          Mikes Liquid Audio: Knowledge Experience Customer Service you can trust-KICKER WetSounds ACME props FlyHigh Custom Ballast Clarion LiquidLumens LEDs Roswell Wave Deflector And More

          Comment


            #20
            Yea Chp I'm in on the blues. I will get a count today
            Ain't no 1/2 steppin'

            Comment


              #21
              CHP is the price good for XS-650 speaker rings or will it be different? I could use 3 sets of rings for XS-650s in orange as well.

              Comment


                #22
                Chp, I need 8 of your blue cupholder rings. The Inside Diameter of the rings need to be between 3 5/8" to 3 3/4". Hope that makes since. My cupholder hole is 3 5/8 and the outside edges of the cup holder is 4", so 3 3/4" ID of the ring would leave plenty of room for the cupholder to slip in. Are you going to be making pairs of xs-650 speaker rings? I'd also be interested in 3 pairs of those if you can do them for 40 a pair frosted. Let me know
                Ain't no 1/2 steppin'

                Comment


                  #23
                  Im in on 2 pair of the speaker rings in red for the xs-650s. I want then to match the other 2 pair I have though. I bought my other 2 on ebay. I dont know if they are frosted or not. Here is a link.


                  http://www.ebay.com/itm/Wet-Sounds-T...730266&vxp=mtr

                  Comment


                    #24
                    Im wanting to pre wire all the cupholders and speakers so Ill b ready to go when they get here. Are you running 22 gauge, power and ground wire? How long of wire will the pucks have on? 5 or 6 inches?
                    Ain't no 1/2 steppin'

                    Comment


                      #25
                      I want to order some as well for my new Z3.
                      I haven't picked it up yet can anyone tell me how many cup holders and in boat speakers there are ?

                      Comment


                        #26
                        What stereo package does it have Travis? Most likely you have 6 in boat speakers.

                        Comment


                          #27
                          Originally posted by chpthril View Post
                          Ok crew, heres where we're at. I am heading out today for Consumer Electronics show in Vegas and will be back next week. I will be putting in my ring order and those that have confirmed their details. So far, we have:

                          GCombe = 3 pr in-boats orange. we just need to decide which model so we can make sure we get the correct diemnsions.
                          Wicked = 12 cup-holder rings in green. Just need to double check the dia of your cup-holder do to too many variances among manufactures.
                          Dave K = 3 pair of in-boats in red and maybe some cup-holders. Just need to decide on how many and double check the OD of them.

                          And the maybe's

                          Bryce = Are you in for some cup-holder?
                          Ddubz = just in-boat rings, no LEDs, so I just need to know how many pair and for what model speaker and if you also want cup-holder rings, I need to know how many and the OD of your cup-holders
                          Talltigeguy = How many cup-holder and what color?

                          Anyone else, jump in!
                          I'm committed to 3 pr for the Kicker 11KM6200's
                          I'd like cup holders but I am not sure how many and what size unless you know??

                          And also can a dimmer switch be used? I have one here that I bought for one of those 20 ft rolls??
                          Life is good...
                          Happy Wife Happy Life

                          Comment


                            #28
                            Originally posted by Travism View Post
                            I want to order some as well for my new Z3.
                            I haven't picked it up yet can anyone tell me how many cup holders and in boat speakers there are ?
                            Travis,

                            Your Z3 will have 6 in-boats if you have ordered the premium or tower-o-power stereo option levels. 4 if its just coming with the base level stereo package.

                            I honestly do not know how many cup holders it will have. Could be 12-22. Hopefully someone with a Z3 could count the number and maybe double check the dimensions. I'll contact you via private message about the details.
                            Mikes Liquid Audio: Knowledge Experience Customer Service you can trust-KICKER WetSounds ACME props FlyHigh Custom Ballast Clarion LiquidLumens LEDs Roswell Wave Deflector And More

                            Comment


                              #29
                              Originally posted by Dave K View Post
                              I'm committed to 3 pr for the Kicker 11KM6200's
                              I'd like cup holders but I am not sure how many and what size unless you know??

                              And also can a dimmer switch be used? I have one here that I bought for one of those 20 ft rolls??
                              Yes, a dimmer can be used.
                              Mikes Liquid Audio: Knowledge Experience Customer Service you can trust-KICKER WetSounds ACME props FlyHigh Custom Ballast Clarion LiquidLumens LEDs Roswell Wave Deflector And More

                              Comment


                                #30
                                I spoke to the dealer and it does have the 6 in boat speakers and two rev 10 tower speakers (which already have the led rings).

                                I'm not sure on the cup holders. Can someone with a z3 help me out ?

                                Thanks,

                                Travis.

                                Comment

                                Working...
                                X