I'm sure there are plenty of things about our boats and the way they function that we would love to change or tweak. The easiest ones I see are changes and updates to the Tige Touch, it's UI and functionality. This is simple from the standpoint that the software developer can make the changes, send it to Tige to test and then the update can be emailed to owners or to dealers. There's no real labor involved that the dealer will charge Tige for and it could actually be a money maker or at least pay for itself if you charge for the update or even charge for additional features (think of the Apple App Store). Here are a couple. Please feel free to add your own suggestions.
Save Current Settings
My biggest complaint I have with Tige Touch is the inability to store a rider's preset from the current settings. Here's what happens to us everytime we go out:
1. I activate the 'WAKEBRD' preset I set up where I typically overfill the rear ballast on purpose.
2. I dump one side or the other while my wife is riding in order to clean up and balance the wake depending on how many people are in the boat and where they are sitting. I know it's easier to have someone move but most of the time it's just me, my wife and 2 kids.
3. Adjust speed and TAPS position.
4. Once she is done riding, I turn the key off so my kids can swim and I can get ready to ride.
5. When I'm ready to ride I have to activate the preset again which causes the pumps to fill then drain, fill then drain for several minutes. This kills the balancing I did while she was riding so I either have to sit there and guess or ask my wife to adjust it while I'm up (which she usually doesn't do or gets mad when I ask her to because she's too busy with everything else which I understand).
I've left the boat running a few times while changing riders but I don't like doing it. You can also just leave the preset alone and set the speed set where you want it and manually adjust the TAPS. That way the ballast doesn't get changed. What's not cool about that is that you have to manually adjust the TAPS plate.
I guess I could wire the TT so that it stays on all the time until either I turn the battery switch off or I manually flip a switch. I'd rather not do that though.
Tige, can you please add a button somewhere on the Tige You page that says 'Save Current Settings'. It might also be nice to be able to view those settings (with actual ballast percentages that are not at the nearest 25%). It would also be cool to have a 'Load Previous Settings' or maybe just a couple quick save presets (3 or so) that you can go to and press and hold to save the current settings like setting a radio preset on most car stereos.
Actual Ballast Percentages
Since the current ballast levels are simply based on time, can you please have the readout show the actual percentage or at least round it to the nearest 5%? 25% is silly and inaccurate. You may need to also give the ability to accurately adjust ballast timers instead of only adjusting it in minutes.
Auto Pull
I know this is probably a stretch and not as simple as the other 2 but it sure would be nice to adjust the throttle curve of a rider's preset. I think Malibu does this already. Nothing frustrates me more than when I hit the throttle too hard or not hard enough and it makes my son fall. I know he'll grow out of that but it still would be a very nice feature.
I know there's more but these are the biggest ones I can think of right now. I'd happily pay for each of these separately or as a group.
Tige, please respond with a real answer and not just, 'We are working on a few updates or we have been looking into doing this or that and should have it out soon.'
I'm not mad. I love my boat and Tige Touch but I think these could be really big improvements to the functionality of the boats.
Save Current Settings
My biggest complaint I have with Tige Touch is the inability to store a rider's preset from the current settings. Here's what happens to us everytime we go out:
1. I activate the 'WAKEBRD' preset I set up where I typically overfill the rear ballast on purpose.
2. I dump one side or the other while my wife is riding in order to clean up and balance the wake depending on how many people are in the boat and where they are sitting. I know it's easier to have someone move but most of the time it's just me, my wife and 2 kids.
3. Adjust speed and TAPS position.
4. Once she is done riding, I turn the key off so my kids can swim and I can get ready to ride.
5. When I'm ready to ride I have to activate the preset again which causes the pumps to fill then drain, fill then drain for several minutes. This kills the balancing I did while she was riding so I either have to sit there and guess or ask my wife to adjust it while I'm up (which she usually doesn't do or gets mad when I ask her to because she's too busy with everything else which I understand).
I've left the boat running a few times while changing riders but I don't like doing it. You can also just leave the preset alone and set the speed set where you want it and manually adjust the TAPS. That way the ballast doesn't get changed. What's not cool about that is that you have to manually adjust the TAPS plate.
I guess I could wire the TT so that it stays on all the time until either I turn the battery switch off or I manually flip a switch. I'd rather not do that though.
Tige, can you please add a button somewhere on the Tige You page that says 'Save Current Settings'. It might also be nice to be able to view those settings (with actual ballast percentages that are not at the nearest 25%). It would also be cool to have a 'Load Previous Settings' or maybe just a couple quick save presets (3 or so) that you can go to and press and hold to save the current settings like setting a radio preset on most car stereos.
Actual Ballast Percentages
Since the current ballast levels are simply based on time, can you please have the readout show the actual percentage or at least round it to the nearest 5%? 25% is silly and inaccurate. You may need to also give the ability to accurately adjust ballast timers instead of only adjusting it in minutes.
Auto Pull
I know this is probably a stretch and not as simple as the other 2 but it sure would be nice to adjust the throttle curve of a rider's preset. I think Malibu does this already. Nothing frustrates me more than when I hit the throttle too hard or not hard enough and it makes my son fall. I know he'll grow out of that but it still would be a very nice feature.
I know there's more but these are the biggest ones I can think of right now. I'd happily pay for each of these separately or as a group.
Tige, please respond with a real answer and not just, 'We are working on a few updates or we have been looking into doing this or that and should have it out soon.'
I'm not mad. I love my boat and Tige Touch but I think these could be really big improvements to the functionality of the boats.
Comment