Can anyone tell me the width at the fenders of the boatmate trailer with the rz2 on it?
-
-
Outside of fenders?Originally posted by 2thdoc01 View Post -
YesComment
-
Ill go measure in a minute.Comment
-
I have a 07 RZ2 and my boatmate trailer is 101 ¼" outside of fendersComment
-
So is the boat wider than the fenders?Comment
-
Probably at the rub rail,but that's at least 5' off the ground.It's a 102" beam on the RZ2.I do all my own stunt work. hey ya'll watch dis.Comment
-
At the front of the fenders my boat is about a ¼" narrower. Im not sure where the widest part of the boat is.Comment
-
Ok thanks...I'm trying to layout the garage.....I thought a 4 car would be enough....at 40x30 ....but how my stairs come into the garage and the fact that I have a 2500 hd crew....makes it a little tricky. I'm putting cabinets in and trying to see where the boat will go. I have a workbench that is 24 in deep and the garage is 28.5 feet deep on the side where I was thinking the boat would go...so the rz2 is like 24' with swim platform?Comment
-
depends what wheels/tires you have also, they make a slim fender and a wide fenderOriginally posted by 2thdoc01 View Post"Failing to prepare is preparing to fail" John Wooden- Rest in PeaceComment
-
Well it can't be wider then what is it 8 feet 6 inches is max legal road width most trailers that size boarder the edge I'd double check but pretty sure that's max width before over size loadComment
-
I'd guess some states back east might be different but it is usually 14'W on two lane roads and 20'W on interstates before you need a permit in most western states. Thats for heavy hauling. I never have inquired about getting a permit for anything a 1/2 ton or 3/4 ton could haul.Originally posted by rensink View Post"Failing to prepare is preparing to fail" John Wooden- Rest in PeaceComment
-
We do it hauling cruisers at our marina I'm talking 32+ sea ray sundancers we pull with our 1 ton have a year round permit for it through the DOT for width and weight I believeComment
Comment