Finished heater install

[topaz surfer]

Yep just in time for the snow nickypoo. But its supposed to be 60 by Thursday, not so good for winter fun ugh. So you better hurry up on your project. Lol. And yes talltigeguy, I thought about taking out the cooler and putting it there but opted for the storage space in the observers compartment cause all of my other storage is full with ballast. Surfs up. Lol.

[NICKYPOO]

It's a good thing I have my little project. Otherwise I would probably be going batchit from cabin fever.

[Wakeman22]

Nice work!

I just completed a heater install in my boat, and a heater is a must.

I actually put the heater on the opposite side so that the majority of the heat is for the passengers and I don't have to stretch heater tubes beside the driver's seat or in front of my feet. I have one directly to the left of the driver that stretches across for me, and that seems to work great. It takes away from some storage there, but I figured that I have oodles of storage anyway, and can do without.

On an 03-05 22V/24V, I think ripping out the cooler and putting it under the observer seat would be the bombdiggity.

Wind screen for sure and love the word Tall...

Bombdiggity

Any ideas on making a wind screen or buying one?

[Iwndr]

Wind screen for sure and love the word Tall...

Bombdiiity

Any ideas on making a wind screen or buying one?

Get with Chpthril
http://www.tigeowners.com/forum/show...ht=Wind+screen

[chpthril]

Wind screen for sure and love the word Tall...

Bombdiiity

Any ideas on making a wind screen or buying one?

I can do one for you!

[topaz surfer]

Here are a couple of pics that I'm adding. I had Heater craft add a few extra feet to the pull outs and the only problem they said they run into is that they don't stay closed as well cause of the extra hose in the tube so here is what I came up with. I took a hose clamp and cut 4 small pieces to go over the tabs that hold the vent in and then sandwiched them under another hose clamp that goes around the tube. With just a small amount of extra pressure holds the vent in much better. As far as the windscreen I might try and make my own. But if it doesn't work out I will deffinetly order one from chpthril.