I have a problem with the shifter on my 20V. I took mine all apart and I fixed the wires that were worn through and shorting out for the TAPS system. The problem is the chrome inner ring needs to NOT move and with the poor design it does move and when it moves it tears up the wires and is a danger issue also of not being able to shift. I called Tige and they did not offer any help other than telling me that the shifter is made by Teleflex Marina Controls. I called Teleflex and they said its the first they heeard of this problem, this control is total junk. I fixed mine for now by spacing the handle a bit more between the control handle and the chrome inner ring but its not perfect and I am afraid to have anyone drive the boat because of it. I need to get this thing fixed correctly somehow. Please post if you have the same issue so I can share this with Teleflex.