RZR - need help

[larms]

New to all this.
Out on the lake yesterday and a few things decided to stop working. We are on a holiday so not close to the dealer that we bought from.
Blower does not come on automatically anymore - Tige touch shows it being on but it is not - can touch it on and off but nothing happens - the manual blower switch under dash does work to turn it on and off.
Speedset does not seem to set anymore - looks like it is on fine and says set but does not "lock" in.
Taps is stuck at 4 - will go up to 8 but will not go below 4 - would the Taps issue have happened when I set Viper back to factory settings?
For sure the first 2 issues started before I reset Viper to factory settings.

Any help would be appreciated.
Thanks

[JreisRZR]

Hmm I think it maybe time for an rzr picture thread...

I have found speedset finicky to set, but very precise once you get up to speed, you have to set the cruise at idle rather than on the fly or it will not take. If you do set it on the fly then you must back off throttle a touch and re Apply throttle to engage the speed.

The blower issue is odd... Does the switch light up green on the switches page of your touch after you've started to indicate that the blowr is on?

Good luck! Try that on the speedset and hopefully your vacation will be saved! I find the taps at 4-5 with 2k lbs to be perfect for wakeboarding, dint worry about the blower!

[larms]

Thanks - yes the blower light goes green on the touch - but nothing happens. Will see how I make out today!

[JreisRZR]

Its funny that you highlight those 2 issues because those are the only real issues i have, forgetting speedset and then not having it kick on in time when you have a rider and a sickly blower that makes awful noises, but always runs. how many hours have you put on?

Yes good luck! I don't know if you've tried that with speed set but give it a shot!

[larms]

only 12 hours- have not really seen summer where we live! Will put a bunch on this week. Dealer got back to me about the blower - says it is a blown fuse and I should get a 15 amp fuse and put it in versus the 5 that is in there.

[ragboy]

You should be able to set speed on the fly, just don't use the plus minus buttons, just use the huge SET button. Go close to desired speed, hit big orange SET button, bury throttle, plus minus to taste. Works on my boat.

[larms]

Will give it a whirl.
So far calibrated Taps and it seems to work....bought 15 amp fuse for blower..so far it works!
Thanks for the help.

[skippabcool]

Glad your back up and working.

[pzbilly]

Reset from tige touch