Went to the lake this weekend and noticed my tower is loose, not sure how to tighten this up....ok, I think I know but looks like a major pain in the ars. The first pic is the left side, normal, the second pic is the right, there is about a 1/4" gap in the right and I can move it back and forth.
-
2005 Tige 24v
Wake and Bake! -
I'm not familar with it.But from the picture i would guess a allen type set screw is loose or it has a bolt coming in from the top.I would look on the opposite side of the picture or the bottom for the set screw.I do all my own stunt work. hey ya'll watch dis. -
It looks like an extreme tower mount.
Open the front lockers and look up. There should be a nut that you can tighten.
My boat is a Switch V and the other two (back legs) are harder to get to.
For the one on the left, remove the seat cushion and you will need a few socket extensions with a deep socket to tighten it. For the one on the left, you will need to remove the ice chest behind the driver and then use the same set up as you used on the left side.Last edited by whitlock87; 05-16-2011, 02:07 AM.Tige, it's a way of life!Comment
-
One more thing, every time you work on your boat, you should be checking these.Tige, it's a way of life!Comment
-
Thanks, I will give it a shot this week and see how it goes.2005 Tige 24v
Wake and Bake!Comment
Comment