Serious proof of the ConvexV hull!

[IDBoating]

On my 2000 21v we have the center drain plug. It is the only one we use and the only one that will completely drain the bilge. Wonder when they stopped installing these?

91Terminator (above) makes it sound like that center plug is an option, even now.

[Ewok]

It's always an option, just depends on how much money you want to spend. You could get a through hull installed and put a plug in it, and modify (chop up) the floor, put a little access hatch in it and call it an option.

[IDBoating]

You could get a through hull installed and put a plug in it, and modify (chop up) the floor, put a little access hatch in it and call it an option.

Remind me to never let you work on my boat.

{grin}

[dogbert]

Many boats have the lowest point in the hull in the center, including mine. I have a forward drain in my boat in fact.

Unfortunately, Tige is constructed such that a forward drain hole is apparently impossible to have on the V-drives. I always found this to be annoying on my 05 24V. I would usually just leave it open and it will eventually evaporate out. It did help to go to the steepest hill I could find, park on the hill, jack the tongue up on the trailer, and I could get most of it out. (I would keep the boat attached to the hitch so I didn't have to worry about the boat rolling away, and I could get a good 6 inches of rise out of the front on top of the angle of the hill).

I have one in my boat

[Ewok]

Remind me to never let you work on my boat.

{grin}

Oh, don't worry, I won't put any holes in your boat, I'll just convince you to do it for yourself!