Engine hatch piston

[Lightning Rod]

Where can I find an engine hatch piston for a 06 22i
Ameritool Mfg 315\668\2172 625-SSID-7-90#

Thanks

[Oklahoma Breakdown]

http://www.ameritoolmfg.com/

[Lightning Rod]

http://www.ameritoolmfg.com/

Tried them already

Have to go through dealer/ Tige network, Local dealer (2 hr drive) dropped Tige, was hoping to find someone thru here

[spyderwebb]

What about these guys, someone on here said they have used them so I saved it to my favorites because I'm going to need to replace mine too.

http://www.spdhardware.com/catalog/list.asp?id={A818FF64-E51A-422F-A59A-4E2E52A3BDA2}

[2whlin]

yep, SPD will have anything and everything you need for gas springs, brackets and more.

[Bandsecurity]

I had the same issue and wnt to the local auto parts store and bought one for $20. You need to know the length, shaft length and pounds of pressure. On yours, the length of the piston is 7 inches with 90lbs of pressure. The ones of at the auto store will not have all the details written on the package so you just need to eye ball the size and make sure that the connectors will fit w/ your boat. As for the pressure, if you can compress it with your body or do it pushing on the floor, it is not enough.

[chpthril]

Where can I find an engine hatch piston for a 06 22i
Ameritool Mfg 315\668\2172 625-SSID-7-90#

Thanks

Oh man, I just placed an order yesterday with my general marine supplier for one, along with a few other things.

I can get you a price, but I need to know: expanded length, collapsed length, poundage and rod diameter. Black or SS?

[Lightning Rod]

Oh man, I just placed an order yesterday with my general marine supplier for one, along with a few other things.

I can get you a price, but I need to know: expanded length, collapsed length, poundage and rod diameter. Black or SS?

Thanks Mike

625 series 7" 90 lbs

Stainless Steel
Rod dia. .250"
Body dia .625"
Stroke 7.5"
Compressed length 11.25"
Extended length 18.5"
End mount thread M6x1
Force lbs 90


Gonna check with old dealer tomorrow also

[chpthril]

Thanks Mike

625 series 7" 90 lbs

Stainless Steel
Rod dia. .250"
Body dia .625"
Stroke 7.5"
Compressed length 11.25"
Extended length 18.5"
End mount thread M6x1
Force lbs 90


Gonna check with old dealer tomorrow also

Ok, My distributor has the AmericanTool SS Gas Springs, but the closest they have listed is a 60 PSI/LB / 5/16" rod / 20" extended / 12" compressed / 8" stroke and fit a 10MM ball at both ends.