1998 pre2150wt owners manual & TAPS info

[FDekker]

Hi guys,

im new to the forum, I just purchased a 1998 pre2150wt yesterday and was hoping to get a manual for it for some general understanding of the boat.

It has the older hydraulic TAPS system and it barely moves when I hit the switch. I’m having a hard time finding information about it so I’m hoping you guys can help.

Is there a reservoir for the TAPS system somewhere?

Also the Taps gauge was broken/missing when I bought it. I’m curious if there is a replacement for it, or if I can use a traditional trim gauge as a replacement.

Thanks guys!

[TeamAllen]

Congratulation on your purchase and welcome to the Tigé family. If it's a 2150 it should be a 97. 98 should be 2200i I believe.

You probably need to add ATF fluid to the pump reservoir. It is located behind the observer's seat under the carpeted box. Shine a flashlight against the reservoir to check the level. Remove a small rubber plug on top. Add ATF fluid and run it through its paces. You will need a very small funnel.

This thread for a TAPS gauge may help.
https://www.tigeowners.com/forum/gen...-gauge-gp4494a

There is no real manual for the older boats. Mercruiser had a manual for their components Service Manual #17 1&2

[FDekker]

Thanks Mike, I appreciate that.

We are still having a hard time finding the reservoir. I don’t know if I’m just missing it or if it’s in a hidden location.

would you happen to know if the rear deck storage area opens up with a latch or switch? And if so, where the latch/switch is located?

[TeamAllen]

This is what the pump look like. The actual reservoir is at the base. It is located underneath the carpeted box. You need to remove the carpeted box with 3 or 4 phillips screws.
https://www.westmarine.com/bennett-m...er-264044.html