If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
At one time is was thought to be a bad ground. You could splice into the screen ground wire and add another ground. Run it directly to the ground buss bar. I haven't seen the additional ground fix it in the past. May be worth a shot though.
Whatever it takes to stop the screen from changing by its self
Sent from my LM-V600 using Tapatalk
It doesn't say what your boat is, but FWIW in my experience the "ghost touches" where screen cycles thru menus and turns functions on and off on its own resolves itself with a new screen. Especially on 15-16 with first version of TT2(will have a Polk head unit in the glovebox)
It doesn't say what your boat is, but FWIW in my experience the "ghost touches" where screen cycles thru menus and turns functions on and off on its own resolves itself with a new screen. Especially on 15-16 with first version of TT2(will have a Polk head unit in the glovebox)
I have a 15 RZ2. Boats been in storage for a while now so I have not been in here in a while. Switched from boat research to snowmobile research
Comment