Any Old-School Tige Owners here?

[TedC]

Hi All. New to the forum. Have a mid-90's 2002 fslm comp. Still looks pristine and runs great. Very few wakes have come close to this one - for slalom OR barefoot. Looking to see if anyone knows of a good source for replacement parts. Would love to redo my gauges but hard to find white on white with the pink/red glow. Also have some hardware that is aging - specifically the back padded storage/cooler flush-mount latch.
Any thoughts would be appreciated!
Cheers.

[NICKYPOO]

Most anything you replace that’s not mechanical you will have to source out and generally upgrade. You might be able to find one of the old latches though. Not sure where to start looking any more. Got a picture?

[TedC]

Thanks for the reply! Yes, here's a picture of the latch from above, and below.

[TeamAllen]

Welcome to the site. Nice model choice. Post up a pic. There are few of us still around. Nickypoo's advice is solid. Just replace them as a new set. The TAPS gauge is the only original gauge on my dash. Not sure if you have TAPS on your 02 FSLM?

The red color just comes from a little red plastic cover. You can remove the red cover by just pulling it off of the bulb. Very simple.
A good source for a new gauge set is https://www.boatersland.com/faria.html
I chose Euro white for my replacements. I replaced one speedo with a new Perfect Pass Stargazer Wake Edition gauge and the other I had rebuilt with new GPS guts.
http://perfectpass.com/?q=systems
http://www.nauticlaugic.com/airglide.html

The latch is a little challenge. That will take a little more research.

[TRC]

Hi TedC. Also sort of new to the site although I am the original owner of my 1995 2002 FLSM which I bought in 94 at the Discovery bay dealer. I am starting to update my boat by adding in a raw water strainer, wakeboard tower, new head unit and either a Perfect Pass or HydroPhase unit. As a note, I am also a "TedC" so I think it sort of funny we have the same boat.

[NICKYPOO]

I used Southco latches on all my trunk hatches. Funny that Nautique now uses them in their new boats. Southco makes all kinds of cool stuff.

[Rrandar]

Just bought and installed this from Sarasota Quality Marine Products. Had to make a latching/locking bracket for the cam to strike on but it was a great fit. I'll post a pic as soon as I can.

https://sarasotaqp.com/product/ll-95...-extender-cam/

[Rrandar]