Need help with details

[somebodyelse5]

Ok guys I need some help. Im making my CAD project and its going to be a boat hull. Issue is that i need some measurements that I cant find on the net and i cant go home to measure my boat. Can someone tell me what the deepest point on the hull is? Like from cap to V ? Im going to try and model it after the 2002 20V. Any measurements you guys know would help SO much. Otherwise im just guessing haha
thanks

[somebodyelse5]

No body?

[chadster2]

I'm all that...
Mine is down stairs on the trailer but how to find where the water line is and where to where. Mine is 2004 22 ft

No body?

[somebodyelse5]

I'm all that...
Mine is down stairs on the trailer but how to find where the water line is and where to where. Mine is 2004 22 ft

I just need a rough estimate of the point of the V at its deepest to the top of the cap if that makes sense? So rub rail to the V at the point where the beam is the widest. Doesnt need to be very accurate. Really appreciate it!!!
gotta study chem now but ill be on later and specify some more

[chadster2]

In-between tower and wind shield 101 1/2
34 inch from center rail to lowest point
40 1/4 inch from center rail to bottom of fin

[chadster2]

okay, I'll go back to being a nobody now......

[somebodyelse5]

Sorry i didnt respond haha. Im actually almost done with my boat so ill show you guys some pics when its done!!