Announcement

Collapse
No announcement yet.

Ballast issues

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Ballast issues

    My aft port ballast doesn't seem to be filling. The other 3 work fine. Any ideas on how to track down the problem?

    #2
    Have you checked the pump to see if the impeller is still in one piece?

    Have you tried to turn the pump on and put the boat into reverse to see if the ballast tank fills?

    Comment


      #3
      No. I just bought the boat. What does the reverse do for you and is there plug on the tank somewhere?

      Comment


        #4
        Putting the boat into reverse forces the water into the pickups of the ballast tank.

        Lets start with, what year boat model do you have? I am assuming a 2007 or 2008 year.

        Comment


          #5
          2006 20v

          Comment


            #6
            I would try putting the boat into reverse. Tige ballast systems have had issues with air pockets getting into the lines and the pump not having the ability to continue to suck the water into the lines. But, I would do that once you locate the pump and verify that your impeller is in a good condition. If the impeller is tore up, that thing is just spinning around and around doing nothing.

            Comment


              #7
              Thanks

              Comment


                #8
                You are welcome. Once you have the time, post so pictures of your boat. We like to see others and what color schemes they have. Welcome to the site and do check back here. There are a few others that might provide some comments on this also.

                Comment

                Working...
                X