Announcement

Collapse
No announcement yet.

ballast in 20v

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    and made a hole in the hallway, bow ye put a cap screw record within a space to put a bag of about 100 liters

    Comment


      #17
      Originally posted by dogbert View Post
      It's a little hard to see, but it looks like the TAPS gauge. There should be a control for it on the left side of your throttle handle. It will lower or raise the trim tab (TAPS plate), which lowers or raises the attitude of the boat while under way. You can use this to shape your wake.
      I see the display where the rules governing the TAPS, is just opposite of this, and this is not for me dysplay works

      Comment


        #18
        Originally posted by joakin View Post
        I see the display where the rules governing the TAPS, is just opposite of this, and this is not for me dysplay works
        Can you get a larger picture of just this gauge? It's impossible to tell from your picture. The gauges on these boats are interchangeable so it's possible the previous owner removed the original gauge and replaced it with something else.
        Cursed by a fortune cookie: "Your principles mean more to you than any money or success."

        Comment


          #19
          Originally posted by dogbert View Post
          Can you get a larger picture of just this gauge? It's impossible to tell from your picture. The gauges on these boats are interchangeable so it's possible the previous owner removed the original gauge and replaced it with something else.

          tonight I will give a picture closer, the regulation of taps is in the right side and consists of a needle, I said this is digital and is on the left side, exactly where the red circle.

          Comment


            #20


            Comment


              #21
              mine is the exact same set-up and ahs the same blank gauge as yours.
              I'm full of tomfullery

              Comment


                #22
                but, on the clock that I put in the picture, which is used for? mine does not work

                Comment


                  #23
                  Post

                  Comment


                    #24
                    I can say is that for this gauge? I can not believe

                    Comment

                    Working...
                    X