Updated Ballast Switch Actuators

[chpthril]

Well, it was time to replenish the stock, so we made a little change on the custom. Now offering actuators labeled with positions. Now, just need to mail a set out!

[killerbren]

Nice, my boat has the cover on and I dont feel like crawling in there. Last year if I remember correctly, the switch covers had "ballast" in the middle and "fill" on the top, "empty" on the bottom correct? If so, I may have to buy some of these off you, take my money!

For the transfer pump, do you know if I can get a custom switch cover with "STBD" on the top, and "Port" on the bottom. The arrows always seem to confuse me.

[chpthril]

My thoughts with the arrows was to indicate which way the water would flow by which arrow was pushed. I can see where the words "PORT" and "STBD" might work better for some.

PM sent

[Dandy]

Mike,
Here is a pic of the switches on our boat, 2 bow and 2 rear. I am assuming these are a just a quick swap out for the switches that we have? If so, I would like to get a set. If you can set them aside, I need to circle back with you on a head unit, remotes and possibly some speakers. Just pulled the boat out of storage this weekend and need to get a few measurements
2007 22Ve Speedset & Switches.jpg.

[chpthril]

Yes, its a simple as popping off the current actuator and snapping on the new one. Switch body and electrical stay in place. Just note, I do not have a port and starboard bow switch, so in your case, it would require two bow switched that are the same. other wise, more than happy to supply them.