2012 rz2 port bow no fill or drain

[JTs-rz2]

1. My port bow has not been consistently filling. I tried on plane and floating. I opened the hatch and moved the hoses around once and got it to fill. But now I am back at not being able to fill.

2. What is the best way to open up the bow area to check the bow sacs? I want to check all hoses and connections this winter.

Thanks!

[Z3 LKG]

I had a similar issue. One of my bow sacks would not fill. I could feel the pump spinning, but it was not filling the sack. My dealer instructed me to (While the boat was in the water) give the Tsunami pump a turn while pushing in the red tab and with the pump running. once some water starts flowing you must then QUICKLY replace the cap on the pump. This fixed my problem of the pump losing it's prime.
Good luck,
John

[BCRider]

You may also have an air lock. Pull the fill hose off with the pump on and suck on the hose (that's what he said) to pull the air out.

[JTs-rz2]

Thx I will give those tricks a shot