enzo style sack for 2002 23V

[tigeidaho]

Looking for a little input on an enzo style sack for my 23v. Will the sky high generic fit or should I go custom to get it in there like a glove. I am looking at manual fill for now and then adding pumps this winter. Fill and drain locations a concern? And a big thank you to sandm for going out with us and helping set up the weight.

[duffymahoney]

You want the fills on the top at the highest point and the drains to be on the bottom rear of the sac. Are you looking to surf or wakeboard? Here is my custom for my 24v. Not the same size but should give you an idea.

[sandm]

if you are going from scratch like you are, I'd look for the cheapest alternative. shop the enzo(let me know and I might be able to get you a deal from tyrell since I got the boat there-he has enzo's in stock and that would make jeff happy ) and shop mike's custom 24ve sack, but I'd buy whichever one is cheaper as you don't really care where the fill/vent ports are located since you are running all new lines. plug/play is not applicable here.
remember that the sacks will fill/conform to whatever the compartment is and I would think either the enzo or one of the rz4/z3/24ve sacks would be more than enough for what you are needing. mike told me on the dark side of my boat with the cooler location, he sells me the same bag(reversed port locations for plug/play) and just doesn't unfold the finger all the way since it hits the cooler. if the finger is too long on your boat, it will just start filling the top quicker.
as long as it has 2 fill/1vent on top and a drain or 2 in the back you are good to go and most of the enzo style sacks have 5-7 ports on them.
your wave was real close last night
was a good time. boat is in amazing condition and that wave will only get better/bigger with more weight..