Rz2 Ballast addition

[rensink]

So I'm curious as to what people are adding for ballast our current set up is around 4k for wakeboarding, keeping the 40% in bow 60% in rear..

I want to exchange the rear locker bags which are 350's ideally I'd love to put 750's in there but won't work have the height/width but to short length wise to add them.. It'd be sweet if we could get a wedge style bag to get under the seats since they moved the cooler's up to the bow I want to get just to 5k with it all plumbed in. My other option is just run 2 sacs one across the bow seats of 400 and 1 in the rear of 600 and just use my Tsunami pumps to fill them.. Any ideas?

[Timmy!]

Put the custom surf sacs In the rears and that gives you 2,000 for the rear with only 2 sacs.

[Ewok]

I'm using W719, they are bigger than the locker and should fill it all in. Chpthrill sent me some additional bag fittings to make it work for my set up.

[chpthril]

What sacs, and where are the placed, are you using to gain the 1700-2000 lbs above the factory ballast?

[rensink]

I just saw your repsonse I played around most was getting added to just the rear of the boat in the cabin area then I did try a 300lb in the bow also.