Just got our 2010 RZ4 2 weeks ago. The other day while filling the left front and rear ballast the Tige Touch screen was showing rear 25% full and front 0%, but opening the rear compartment the bag was completely full (can't see the front but feel like it was full as well - because when I drained it, it took a while to empty). Am I having a problem with the Tige Touch panel electronics or ?????. We had to drain them and leave cause of timing (and was also out of gas) so don't know if this is going to repeat. Thanks!!
Announcement
Collapse
No announcement yet.
RZ4 pro ballast issue
Collapse
X
-
Sounds like maybe the timers need reset or a firmware update at most.Mikes Liquid Audio: Knowledge Experience Customer Service you can trust-KICKER WetSounds ACME props FlyHigh Custom Ballast Clarion LiquidLumens LEDs Roswell Wave Deflector And More
-
Originally posted by auburntigegal View PostWhat is recommended time to set the ballasts? I see it goes from 1 to 10 on the setup ballast screen.Mikes Liquid Audio: Knowledge Experience Customer Service you can trust-KICKER WetSounds ACME props FlyHigh Custom Ballast Clarion LiquidLumens LEDs Roswell Wave Deflector And More
Comment
-
Same thing happened when we got our boat. The dealer installed a software update to the Tige Touch system. There is a setup where you set the time for fill and drain for each of the bags. Choices are 1 to 10 minutes in 1 minute increments. Time the filling of the bag and then set accordingly. The % that is shown is the percent of the fill/drain time you have set. Hope that helps.
Comment
-
Originally posted by auburntigegal View PostJust got our 2010 RZ4 2 weeks ago. The other day while filling the left front and rear ballast the Tige Touch screen was showing rear 25% full and front 0%, but opening the rear compartment the bag was completely full (can't see the front but feel like it was full as well - because when I drained it, it took a while to empty). Am I having a problem with the Tige Touch panel electronics or ?????. We had to drain them and leave cause of timing (and was also out of gas) so don't know if this is going to repeat. Thanks!!
Comment
-
Originally posted by auburntigegal View PostThanks! I've got it figured out with the timing and % full and all that, but my front left ballast does not overflow no matter how long I fill it???
Are the sacs filling, can you tell if the bow is sinking into the water?
Ignoring what the gauge indicates, how long have you let the pumps run?Mikes Liquid Audio: Knowledge Experience Customer Service you can trust-KICKER WetSounds ACME props FlyHigh Custom Ballast Clarion LiquidLumens LEDs Roswell Wave Deflector And More
Comment
-
Originally posted by auburntigegal View PostWell, just now getting back out on the water. Seems all the ballasts are filling and I've got it all set now! Thanks!
Do want to ask when wake surfing - left foot forward, fill the port side rear AND front ballast? Or just the rear? Or does it matter?
Comment
-
Originally posted by auburntigegal View PostWell, just now getting back out on the water. Seems all the ballasts are filling and I've got it all set now! Thanks!
Do want to ask when wake surfing - left foot forward, fill the port side rear AND front ballast? Or just the rear? Or does it matter?
Right foot forward = Goofy
Port or Starboard is entirely personal preference. Most people choose to surf frontside (facing the wake). However, some people (like me) like to surf backside (facing away from the wake). So you see, which foot forward you use has no bearing on what side you ride. If you can ride both, you are super cool. If you can ride switch on both sides as well, you are super badazz.You'll get your chance, smart guy.
Comment
Comment