2008 Z1 pumps not coming on

[coyote1]

This past summer I had to put new battery on the boat and ever since the ballast pumps will not come on. Lights in switches do not come on. I thought I might have missed a wire but have taken the rear panel out and there is nothing unhooked. Is there a fuse for the pumps I am missing?

[chpthril]

SInce the switches do not illuminate is a good indicator that the none of the switches are getting their 12V. 12V is needed to both, run the pump and power the light when the switch is on.

Now, I cant recall on an 08 if each switch had its own 12V input or a common input that daisy-chained from one switch to the next, etc. You can look at the back of the switches and see if each has an input into the #2 terminal, or if one pump has an input and then it jumps to the next and then the next.