WTB Alpha Z Board Rack(s)

[dakota4ce]

Or a machine shop could drill them out, retap nicely and then you just get new bolts.....depending on their hourly rate.


Sent from my iPhone using Tapatalk

[BrettLee3232]

The screws are stainless steel. You need a bit better than HSS (high speed steel) like titanium and also a variable speed drill. SS needs slow rpm.

I sent you a DM


Sent from my iPhone using Tapatalk

[lilkw]

The heat is needed to soften the lock tite,
center punch the broken bolt the best you can so you have the most area of the broken bolt to work with before you get into the threads.
and have patience.
keep the drill straight
once you have the bolt drilled with the pilot hole, warm the aluminum finger up with a heat gun or hair drier even, then install the easy out and take a deep breath,
Have faith in yourself
and have patience, if you get in a hurry you have a better chance of goofing it up.

[UNSTUCK]

Or just play with it and see what happens. I've had bolts I thought would be real hard to get out and then they spin right out with my finger. Might get lucky.

[Piero]

Hey Guys,

Looking for the port side swivel arm for my 2013 RZ2 if anyone has one. I will take the whole thing if needed.

[Piero]

Looking for Swivel Arm for board racks port side

[Piero]

Hey Guys,

Looking for the port side swivel arm for my 2013 RZ2 board rack.