Abilene TX - Tige Boats, Inc. is pleased to announce Meredith Marina as the newest dealer to their world-wide dealer network. Meredith Marina is the exclusive Tige dealer covering the New England region; New Hampshire, Vermont, Maine and the eastern region of Massachusetts. Meredith Marina will have a variety of 2016 Tige’s at their dealership very soon. Stay connected with their latest news through the Meredith Marina Facebook page.
Meredith Marina is the closest marina to I-93 with easy access to Lake Winnipesaukee. The marina is one-stop for all your boating needs providing knowledgeable inboard sales and service team, in addition offering valet service of your boat on the water and boat storage needs during the off-season.
“Their experienced staff have over 15+ years in the inboard industry, we are confident that Meredith Marina will provide Tige customers with ultimate premium services and class-defining ownership experience that one expects from Tige Boats," said Charlie Pigeon, CEO Tige Boats.
Meredith Marina recently visited the Tige Boats headquarters and state-of-the-art factory in Abilene, Texas to get a first-hand look at the all-new 2016 Tige line and process of the quality build of every boat produced.
“We researched all inboards on the market today, which included a trip to the Tige factory. Everything we’ve seen and researched about Tige gives us 100% confidence that Tige Boats are the most solid boats built in the industry”, said Chris Templeton, Sales Manager. “During our visit we felt a high level of care and passion from the team who build the boats at Tige. We are super excited to share with our customers the best surf boat in the industry.”
Meredith Marina expects their first delivery of Tige’s soon. Visit their location and check out the 2016 Tige line up. Meredith Marina will exclusively display 2016 Tige’s at the Boston Boat Show in February 2016.
Contact Info: Meredith Marina
2 Bayshore Drive
Meredith, NH 03253
www.meredithmarina.com
Chris Templeton, Sales Manager
chris@meredithmarina.com
About Tige: Celebrating its 25th Anniversary, Tige Boats continues to place innovation and passion at the heart of their boats. Today, Tige keeps these values alive with one common goal in mind—to make your ride better than anything else on the water. From their world-class manufacturing facility and across the 2016 product line, Tige’s consistent quality and design-driven mentality has refined the marketplace, while forever intensifying the love of life on the water.
-
*NOTE OF CAUTION* Check your owners manual for specific information such as fluid type and capacity.
Boat: 06 22Ve
Transmission: Borg-Warner Velvet Drive 10-17-004, 1:1/ Fluid type = Dexron III ATF / Capacity = 2qt
V-Drive: Walter RV26D / Fluid Type = 30w NON-Detergent oil. (RV10-RV50 use 30w oil. RV61-RV91 use an ISO VG 68 such as Shell Omala 68 or Exxon Spartan EP 68) / Capacity = 1qt
https://www.tigeowners.com/forum/tec...on-and-v-drive11-21-2021, 10:59 PM -
I had to get back in the bilge, and my packing was leaking so I figured I would go ahead and put a dripless gor type in. I hope these photos can help someone.
https://www.tigeowners.com/forum/tec...hange-overview11-21-2021, 10:57 PM -
The following article is how to change an impeller on a 2001 Tigé 2300 V with a MerCruiser 350 Mag engine. Other Tigé V-drive models may be similar. If you have a Direct Drive model you may pick up some useful tips, but the procedure for removing the pump will not apply.
https://www.tigeowners.com/forum/tec...mercury-engine11-21-2021, 10:55 PM -
The Jabsco Impeller is one of the easiest impeller to swap out.
https://www.tigeowners.com/forum/tec...absco-impeller11-21-2021, 10:48 PM -
This article will help you change a steering cable with a Teleflex rack system. This will only cover changing the steering cable and not how to remove parts of the interior and flooring to get to the steering cable as there are a lot of different boats that this same procedure will work on.
https://www.tigeowners.com/forum/tec...steering-cable11-21-2021, 10:45 PM